- +971 4 578 7532
- +971 50 803 1253
- sales@deltapower.ae
Cable Trays
Cable Trays are support systems used in building electrical wiring. These cable support systems are commonly used to support insulated power and communication cables. Cable trays provide a more preferable alternative to electrical conduit systems and open wiring.
The cable trays which are available in accordingly are as follows:
• Light Duty Cable tray, also known as P Type.
• Medium Duty Cable Tray, also known as M Type.
• Heavy Duty Cable Tray, also known as R Type.
-Light Duty Cable Tray or LDT which are used for light duty applications and are easy to install.
-Medium Duty Cable Tray or MDT is used to provide extra protection and strength to the cable components which improves the life of these cables.
-Heavy Duty Cable Tray or HDT, it is used for extra protection and is installed very easily and have high accessibility.
Control Cables
Application: Suitable for connections for Control Circuits, Communication Systems, Electrical Panels, Machine Tools, etc. Also used for lighting at lower loads.
Types and Sizes: Upto 61 cores from 1.0 sq. mm to 2.5 sq. mm.
Conductor: Copper – Solid, Stranded (Circular) or Flexible – Bare or Tinned
Insulation: PVC – Type A, Type C, Polyetheylene, XLPE
Inner Sheath: PVC – ST1, HR, FR, FRLS, LSZH
Armour: Galvanized Steel Wire / Strip / Tape
Outer Sheath: PVC – ST1, HR, FR, FRLS, LSZH
Copper Tape
High-conductivity, annealed, soft drawn flat copper earthing tape, manufactured in accordance with BS1432-C101. Suitable for use within a variety of earthing (grounding) and lightning protection applications.
All copper tapes are annealed for ultimate ductility and feature radiused edges to aid on-site installation. Available in a range of coil lengths depending upon the tape dimensions, we also offer a cutting service where tapes are sold by the metre.
For applications where different metals will be in contact with each other or areas of high soil contamination, we would recommend fully tinned copper tapes. Lead-sheathed (Pb) 25 x 3mm copper tape is also available for areas of high soil contamination.
Crepine Type
Crepine Type Strainers are installed in the entrance of pump suction pipes or in a transition from open channel to closed piping.
The main function is to protect the system from foreign matter like leaves, sticks or stones from the pipelines.
Foreign particles that can harm crucial appliances in the system are stuck in the filter of the strainer, thereby preventing entry to the pipeline.
D Type
D Type Irrigation Hydrants have a special closing mechanism enabling gradual flow increase/decrease when the handwheel is turned, preventing slam closure.
Hydrants are available with an optional anti-frost sleeve for deep water networks, and an automatic drainage valve to bleed the body when the hydrant is closed, to prevent frost damages.
D Type Hydrants are used in low pressure applications where the outlets have a flow limiter in order to provide constant flow rate to the farmer. Number of outlets on the body can be increased up to 2 outlets, enabling supply to more than one farmer from a single hydrant.
