Click to enlarge
Prev
Aboveground Type
Aboveground Type
Go to Shop
Next
C Type
C Type

D Type

D Type Irrigation Hydrants have a special closing mechanism enabling gradual flow increase/decrease when the handwheel is turned, preventing slam closure.
Hydrants are available with an optional anti-frost sleeve for deep water networks, and an automatic drainage valve to bleed the body when the hydrant is closed, to prevent frost damages.
D Type Hydrants are used in low pressure applications where the outlets have a flow limiter in order to provide constant flow rate to the farmer. Number of outlets on the body can be increased up to 2 outlets, enabling supply to more than one farmer from a single hydrant.
Compare
Categories: ,
Description

Description

Nominal Size
DN100-150 x 100-150
Nominal Pressure
PN10-16
Face to Face
–
Body Material Options
Ductile Iron
Accessories
Flow Limiter
External Pressure Regulator
External Proportional / Ultrasonic Watermeter
Threaded / Ball Valve / Quick Coupling Connection
Short / Long Type
1×2 Outlet Options
Flange Standards
EN 1092/2
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “D Type”

Your email address will not be published. Required fields are marked *

Related Products

    Pre-Paid
    Read more

    Pre-Paid
    Ultrasonic Watermeters read water flow by the help of two ultrasonic probes positioned in the same axis.
    In case of a velocity change, variance in ultrasonic waves is detected by the probe and by the help of the processor; these variances are converted into flow rate data.
    Flowrate and Consumption Values can be read from the IP68 protected LED Screen.
    Furthermore, it provides an alarm in low battery conditions. Internal Lithium Battery can provide power up to 10 years autonomously.
    Shutoff Valve works with hydraulic principles and is controlled by the Prepaid Controller. When open, the valve provides minimum headloss and it provides drip tight sealing in shutoff.
    Read more
    Dismantling pieces
    Read more

    Dismantling pieces
    Dismantling Joints allow easy installation and removal of valves from the system during maintenance.
    By using the bolts on the product, the user can create a work space in the longitudinal direction and can work easily on the valve that is connected after the dismantling joint.
    Read more
    Triple Function Sewage
    Read more

    Triple Function Sewage
    Air Release & Vacuum Valves for Sewage are designed to perform three functions in a single body for use in wastewater/ sewage systems:
    1. Venting of large volumes of air on the start-up of the system, while pipelines are filled.
    2. Intake of large volumes of air on shut-off of the system, while pipelines are being drained.
    3.  Discharge of pressurized air pockets during the operation.
    Due to its special sealing mechanism, the air valve does not get plugged and can operate in liquids with particles.
    Read more
    Solenoid Control
    Read more

    Solenoid Control

    Solenoid Control Valves are simple electrically activated on/off valves that can be of critical importance in controlling flow in every water system. 

    The electrical signal used to activate the solenoid can be sent from timers, relays, clocks, pressure, level or flow transmitters, etc.

    Read more
    A Type
    Read more

    A Type
    A Type Irrigation Hydrants have a special closing mechanism enabling gradual flow increase/decrease when the handwheel is turned, preventing slam closure.
    Hydrants are available with an optional anti-frost sleeve for deep water networks, and an automatic drainage valve to bleed the body when the hydrant is closed, to prevent frost damages.
    Nozzles that are used in hydrant connection have integral pressure regulator and flow limiter in order to provide constant pressure and flow rate to the farmer. Number of nozzles on the body can be increased up to 4 outlets, enabling supply to more than one farmer from a single hydrant.
    Read more
    Underground Type
    Read more

    Underground Type
    Underground Air Valves that can be buried under soil are designed to perform three functions:
    1. Venting of large volumes of air on the start-up of the system, while pipelines are filled.
    2. Intake of large volumes of air on shut-off of the system, which pipelines are being drained.
    3. Discharge of pressurized air pockets during the operation.
    Due to its Stainless Steel Sleeve, the valve can be buried under soil. As a result, no need for an expensive valve chamber is needed.
    Moreover, it does not require any external isolation valve, due to its integral automatic closing mechanism. The valve can be serviced from a Surface Box and taken out for cleaning or maintenance.
    Read more