- +971 4 578 7532
- +971 50 803 1253
- sales@deltapower.ae
Termination Kit
Heat Shrinkable Cable Termination Kits are extensively tested and used worldwide for reliable cable junctions in the voltage range from 7.2kv to 42kV.
• The kits are designed for either indoor or outdoor applications for cables with polymeric (XLPE or EPR) insulation
• Can be used with both compression or mechanical type lugs (which can be supplied in the kit if specified).
• The termination kits combine the anti-tracking external tubing for excellent weathering and electrical properties
Related Products
Distribution Switchboards
A final distribution board (FDB) is an assembly of protective devices, including two or more fuses or circuit breakers, arranged for the distribution of electrical energy to the final circuits.
• Form 2 segregation as standard
• Sheet steel enclosures ranging from 1.2 mm thickness (standard) up to 1.5 mm (special project requirements)
• Available in row type and pan assembly type
• IP ratings up to IP42
• Single phase and three phase boards available up to 24 ways
• Multiple row DB’s available up to 6 rows (16 and 24 modules)
• Floor or wall-mounted with surface and flush-mounting options
• Panels in compliance with latest international standards and local regulation
Earthing Rods & Accessories
Copper earth rods offer the contractor the best and most economical earth rods for structural earthing and lightning protection – earth rods are designed for use where extremely high corrosion resistance and long service life are required.
Earth rods and their fittings are used to provide the interface to ground in all soil conditions in order to achieve satisfactory earthing systems in overhead and underground electricity distribution and transmission networks – providing high fault current capacity on low, medium and high voltage substations, towers and power distribution applications.
Copper earth rods are produced from solid copper bar and are internally threaded for jointing – when deep driving a solid copper earth rod the usual practice is to insert the rod into a bore hole and backfill with either low resistance earthing compound or Bentonite.
Copper earth rods provide effective earthing for all site conditions and are manufactured from 99.9% copper with excellent corrosion resistance and very high tensile strength.
Earth rods take advantage of lower resistivity soils at greater depths than normal excavation will allow – used in conjunction with copper earth plates they are used to attain an effective earth in shallow soils or in locations with large amounts of buried services eg high voltage switching positions.
Other type of earthing rods are-
• Solid Copper
• Copperbond
• Galvanised Steel
• Stainless Steel
High Mast
Our High Masts, ranging from 18m-60m in height, offer ease of maintenance with a simple and effective winching system which allows the lighting ring to be lowered to ground level for lantern maintenance. We can also offer a full high mast lighting design package to suit our clients’ requirements, whether the application is for Highways, Sports, Airport or Port Authority.
MCC Panels
The MCC panels comply with international standards and are available with multiple power stabs that help in supporting high capacity industrial motors as per the client specifications.
• Fully type-tested panels including internal arc fault test
• Form 2, 3 and 4 types of segregations
• Busbar rating up to 7000 A
• Available in fixed and draw out type of design
• Provision of forced ventilation when required
• IP ratings up to IP65
• Front or rear access with pre-fabricated bolts on base for protective devices
• Fault withstand of up to 50KA for 3 Seconds
• Panels in compliance with all international standards
Reviews
There are no reviews yet.