- +9714 421 8369
- +971 50 379 6862
- sales@deltapower.ae
Related Products
Quick Relief
Quick Pressure Relief Valves protect pumps and water distribution systems from extreme situations by relieving the excessive pressure immediately.
It opens fully in case of a sudden pressure peak and closes drip tight when the pressure level does not exceed the pre-set pressure level.
Level Control
Float controlled valves combine the advantages of excellent hydraulic control valves with the simplicity of mechanical floats.
The ability to separate the main valve from the float enables eliminating most of the installation and maintenance problems associated with mechanical float valves.
Level Control Valve with Modulating Horizontal Float is used to control reservoir filling to maintain constant water level regardless of fluctuating demand.
DI pipes & Fittings
A full range of ductile iron pipe fittings, flanged, socket and spigot ended. Protection by fusion bonded epoxy coating, blue, 300µm.
Good quality, lost foam foundry and at competitive prices. Possible to ship quickly and with 3rd party inspected documentation.
Range of our sizes starts from DN80mm to DN1200mm.
Plug Valve
Critically acclaimed for raw sewage lines, for shut off service. Eccentricity of the plug (and its turning away from the flow path) is a great feature in allowing (sewerage) solids to pass freely. Sizes and Pressures. Sizes 3” (DN80) to 48” (DN1200) and Pressures of PN10, PN16. Smaller sizes up to DN300 can also be rated PN25
Expansion Joints
For water, waste water, chilled water & many other services, to permit pipelines “flex” a bit. Metallic pipes expand and contract when the ambient (or service) temperatures vary and non-metallic pipes (which may be buried) will move with ground settlement etc. Where probable movement can be envisaged the values are designed by a compensator which can flex, thus avoiding undue pipeline damage. Interesting applications are reservoir inlet/outlet connections, pump connections, differing flange standards either end, axial or angular offset of new to old pipelines. Sizes from DN50 to DN5000 and pressures of PN6 to PN25 on rubber, but the larger sizes would be lower pressure capability.. Higher pressures and temperatures in 316SS.
D Type
D Type Irrigation Hydrants have a special closing mechanism enabling gradual flow increase/decrease when the handwheel is turned, preventing slam closure.
Hydrants are available with an optional anti-frost sleeve for deep water networks, and an automatic drainage valve to bleed the body when the hydrant is closed, to prevent frost damages.
D Type Hydrants are used in low pressure applications where the outlets have a flow limiter in order to provide constant flow rate to the farmer. Number of outlets on the body can be increased up to 2 outlets, enabling supply to more than one farmer from a single hydrant.
Reviews
There are no reviews yet.