- +9714 421 8369
- +971 50 379 6862
- sales@deltapower.ae
Related Products
Plug Valve
Critically acclaimed for raw sewage lines, for shut off service. Eccentricity of the plug (and its turning away from the flow path) is a great feature in allowing (sewerage) solids to pass freely. Sizes and Pressures. Sizes 3” (DN80) to 48” (DN1200) and Pressures of PN10, PN16. Smaller sizes up to DN300 can also be rated PN25
Level Control
Float controlled valves combine the advantages of excellent hydraulic control valves with the simplicity of mechanical floats.
The ability to separate the main valve from the float enables eliminating most of the installation and maintenance problems associated with mechanical float valves.
Level Control Valve with Modulating Horizontal Float is used to control reservoir filling to maintain constant water level regardless of fluctuating demand.
Balancing Valves
Balancing Valves are used in HVAC applications for flow regulation.
Cartridge type Dynamic Balancing Valves provide constant flow rate at a predefined pressure range, thereby providing equal heating or cooling opportunity for various users.
Quick Relief
Quick Pressure Relief Valves protect pumps and water distribution systems from extreme situations by relieving the excessive pressure immediately.
It opens fully in case of a sudden pressure peak and closes drip tight when the pressure level does not exceed the pre-set pressure level.
Surge Anticipating
Abrupt pump stopping is followed by a pressure drop as the water column continues traveling along the line.
The returning column hits the closed pump check valve, creating a high pressure surge wave, which travels at up to 4 Mach.
Eliminating such surge requires anticipation and pre-action.
Surge Anticipating Valves react to the pressure drop, accepting the returning column while already open, thus eliminating the surge.
D Type
D Type Irrigation Hydrants have a special closing mechanism enabling gradual flow increase/decrease when the handwheel is turned, preventing slam closure.
Hydrants are available with an optional anti-frost sleeve for deep water networks, and an automatic drainage valve to bleed the body when the hydrant is closed, to prevent frost damages.
D Type Hydrants are used in low pressure applications where the outlets have a flow limiter in order to provide constant flow rate to the farmer. Number of outlets on the body can be increased up to 2 outlets, enabling supply to more than one farmer from a single hydrant.
Reviews
There are no reviews yet.