Click to enlarge
Prev
Double Eccentric
Double Eccentric
Go to Shop
Next
Rising Stem
Rising Stem

Hydraulic Actuated

Butterfly Valves have divided two-piece shaft that is guiding the disc. One of these shafts transfers the gearbox rotation force to the disc.
In case of an operation of the Hydraulic Actuator, the shaft rotates in its axis and moves the attached disc to open or close the valve.
The second shaft is used to guide the disc to the body of the valve. Friction of guiding is lowered by the bronze bearings on the body.
Butterfly Valves have Closed End Disc Design, and shaft bearing system is isolated from the medium by o-rings. As a result, high corrosion resistance and durability is achieved.
Compare
Categories: ,
Description

Description

Nominal Size
DN100-DN2200
Nominal Pressure
PN10-40
Face to Face
EN558-1 Series 14
(DIN 3202 F4)
Body Material Options
Ductile Iron
Carbon Steel
Stainless Steel
Nickel Aluminum Bronze
Rubber Lining
Accessories
–
Flange Standards
EN 1092/2
BS 4504
BS10E
ANSI
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Hydraulic Actuated”

Your email address will not be published. Required fields are marked *

Related Products

    Plug Valve
    Read more

    Plug Valve

    Critically acclaimed for raw sewage lines, for shut off service. Eccentricity of the plug (and its turning away from the flow path) is a great feature in allowing (sewerage) solids to pass freely. Sizes and Pressures. Sizes 3” (DN80) to 48” (DN1200) and Pressures of PN10, PN16. Smaller sizes up to DN300 can also be rated PN25

    Read more
    Underground Type
    Read more

    Underground Type
    Underground Fire Hydrants are made of ductile iron body, valve mechanism, and a spindle that controls the sealing.
    When head of the hydrant is turned counter clockwise, the spindle moves down, sealing the valve at the flow direction. In the reverse action, fire hydrant shuts-off drip tight.
    Underground Fire Hydrants are used with Surface Box and are buried in soil. As a result, hydrants are protected from accidents.
    Read more
    Pressure Reducing
    Read more

    Pressure Reducing

    Maintaining hydraulic balance in water transmission and distribution systems is crucial to system efficiency.

    Pressure Reducing Valves help accomplish this by reducing high inlet pressure to a lower constant predetermined delivery pressure.

    They are the most commonly used control valves.

    Read more
    Pre-Paid
    Read more

    Pre-Paid
    Ultrasonic Watermeters read water flow by the help of two ultrasonic probes positioned in the same axis.
    In case of a velocity change, variance in ultrasonic waves is detected by the probe and by the help of the processor; these variances are converted into flow rate data.
    Flowrate and Consumption Values can be read from the IP68 protected LED Screen.
    Furthermore, it provides an alarm in low battery conditions. Internal Lithium Battery can provide power up to 10 years autonomously.
    Shutoff Valve works with hydraulic principles and is controlled by the Prepaid Controller. When open, the valve provides minimum headloss and it provides drip tight sealing in shutoff.
    Read more
    Y Type
    Read more

    Y Type
    Y Type Strainers are installed to protect system appliances, such as: pumps, flowmeters, control valves or regulating devices.
    The main function is to remove foreign matter like leaves, sticks or stones from the pipelines. Foreign particles that can harm crucial appliances in the system are stuck in the filter of the strainer, and the user can check the blockage of the filter by using monometer connections.
    In case of a situation where the differential pressure reading is high, the blow-off port is used to remove entrapped debris at the bottom of the body.
    Y Type Strainers feature large trap capacity, low head loss and ease of both cleaning and handling..
    Read more
    Dismantling pieces
    Read more

    Dismantling pieces
    Dismantling Joints allow easy installation and removal of valves from the system during maintenance.
    By using the bolts on the product, the user can create a work space in the longitudinal direction and can work easily on the valve that is connected after the dismantling joint.
    Read more