- +9714 421 8369
- +971 50 379 6862
- sales@deltapower.ae
Related Products
HDPE Spacers
For road-crossing where the fluid carrying pipe cannot be buried directly. The movement of heavy vehicles will transfer impact loads and can damage pipeline with leaking water or gas etc. In all such cases, the carrier pipe is inserted into a sleeve pipe. Spacers allow the carrier pipe to be easily pulled into the existing sleeve pipe and the traffic loads do not reach the main service pipelines. Small size carrier pipes DN50 to very large DN3000
Crepine Type
Crepine Type Strainers are installed in the entrance of pump suction pipes or in a transition from open channel to closed piping.
The main function is to protect the system from foreign matter like leaves, sticks or stones from the pipelines.
Foreign particles that can harm crucial appliances in the system are stuck in the filter of the strainer, thereby preventing entry to the pipeline.
Level Control
Float controlled valves combine the advantages of excellent hydraulic control valves with the simplicity of mechanical floats.
The ability to separate the main valve from the float enables eliminating most of the installation and maintenance problems associated with mechanical float valves.
Level Control Valve with Modulating Horizontal Float is used to control reservoir filling to maintain constant water level regardless of fluctuating demand.
Surge Anticipating
Abrupt pump stopping is followed by a pressure drop as the water column continues traveling along the line.
The returning column hits the closed pump check valve, creating a high pressure surge wave, which travels at up to 4 Mach.
Eliminating such surge requires anticipation and pre-action.
Surge Anticipating Valves react to the pressure drop, accepting the returning column while already open, thus eliminating the surge.
B Type
B Type Irrigation Hydrants have a special closing mechanism enabling gradual flow increase/decrease when the handwheel is turned, preventing slam closure.
Hydrants are available with an optional anti-frost sleeve for deep water networks, and an automatic drainage valve to bleed the body when the hydrant is closed, to prevent frost damages.
Nozzles that are used in hydrant connection have integral pressure regulator and flow limiter in order to provide constant pressure and flow rate to the farmer. Number of nozzles on the body can be increased up to 2 outlets, enabling supply to more than one farmer from a single hydrant.
Pressure Reducing
Maintaining hydraulic balance in water transmission and distribution systems is crucial to system efficiency.
Pressure Reducing Valves help accomplish this by reducing high inlet pressure to a lower constant predetermined delivery pressure.
They are the most commonly used control valves.
Reviews
There are no reviews yet.