- +971 4 578 7532
- +971 50 803 1253
- sales@deltapower.ae
Cable Ladders
Cable ladders made from a variety of materials, with a wide choice of cabling depths and load capabilities. They provide a cable management solution for heavy commercial, industrial, mining, LNG or other applications.
They are supplied in straight lengths, but use fittings to make directional or level changes with bends, tees, crosses or risers, or to change cabling widths with reducers.
Related Products
Distribution Switchboards
A final distribution board (FDB) is an assembly of protective devices, including two or more fuses or circuit breakers, arranged for the distribution of electrical energy to the final circuits.
• Form 2 segregation as standard
• Sheet steel enclosures ranging from 1.2 mm thickness (standard) up to 1.5 mm (special project requirements)
• Available in row type and pan assembly type
• IP ratings up to IP42
• Single phase and three phase boards available up to 24 ways
• Multiple row DB’s available up to 6 rows (16 and 24 modules)
• Floor or wall-mounted with surface and flush-mounting options
• Panels in compliance with latest international standards and local regulation
Cable Trays
Cable Trays are support systems used in building electrical wiring. These cable support systems are commonly used to support insulated power and communication cables. Cable trays provide a more preferable alternative to electrical conduit systems and open wiring.
The cable trays which are available in accordingly are as follows:
• Light Duty Cable tray, also known as P Type.
• Medium Duty Cable Tray, also known as M Type.
• Heavy Duty Cable Tray, also known as R Type.
-Light Duty Cable Tray or LDT which are used for light duty applications and are easy to install.
-Medium Duty Cable Tray or MDT is used to provide extra protection and strength to the cable components which improves the life of these cables.
-Heavy Duty Cable Tray or HDT, it is used for extra protection and is installed very easily and have high accessibility.
Control Cables
Application: Suitable for connections for Control Circuits, Communication Systems, Electrical Panels, Machine Tools, etc. Also used for lighting at lower loads.
Types and Sizes: Upto 61 cores from 1.0 sq. mm to 2.5 sq. mm.
Conductor: Copper – Solid, Stranded (Circular) or Flexible – Bare or Tinned
Insulation: PVC – Type A, Type C, Polyetheylene, XLPE
Inner Sheath: PVC – ST1, HR, FR, FRLS, LSZH
Armour: Galvanized Steel Wire / Strip / Tape
Outer Sheath: PVC – ST1, HR, FR, FRLS, LSZH
MCC Panels
The MCC panels comply with international standards and are available with multiple power stabs that help in supporting high capacity industrial motors as per the client specifications.
• Fully type-tested panels including internal arc fault test
• Form 2, 3 and 4 types of segregations
• Busbar rating up to 7000 A
• Available in fixed and draw out type of design
• Provision of forced ventilation when required
• IP ratings up to IP65
• Front or rear access with pre-fabricated bolts on base for protective devices
• Fault withstand of up to 50KA for 3 Seconds
• Panels in compliance with all international standards
High Mast
Our High Masts, ranging from 18m-60m in height, offer ease of maintenance with a simple and effective winching system which allows the lighting ring to be lowered to ground level for lantern maintenance. We can also offer a full high mast lighting design package to suit our clients’ requirements, whether the application is for Highways, Sports, Airport or Port Authority.
Reviews
There are no reviews yet.