- +9714 421 8369
- +971 50 379 6862
- sales@deltapower.ae
CABLE GLANDS AND LUGS
ELECTRICAL AND PANEL BOARD COMPONENTS
• Cable Gland and Accessories
• Tinned Copper Lugs & Ferrules
• Flexible Conduit & Accessories
• Brass neutral link
Related Products
Copper Tape
High-conductivity, annealed, soft drawn flat copper earthing tape, manufactured in accordance with BS1432-C101. Suitable for use within a variety of earthing (grounding) and lightning protection applications.
All copper tapes are annealed for ultimate ductility and feature radiused edges to aid on-site installation. Available in a range of coil lengths depending upon the tape dimensions, we also offer a cutting service where tapes are sold by the metre.
For applications where different metals will be in contact with each other or areas of high soil contamination, we would recommend fully tinned copper tapes. Lead-sheathed (Pb) 25 x 3mm copper tape is also available for areas of high soil contamination.
Distribution Switchboards
A final distribution board (FDB) is an assembly of protective devices, including two or more fuses or circuit breakers, arranged for the distribution of electrical energy to the final circuits.
• Form 2 segregation as standard
• Sheet steel enclosures ranging from 1.2 mm thickness (standard) up to 1.5 mm (special project requirements)
• Available in row type and pan assembly type
• IP ratings up to IP42
• Single phase and three phase boards available up to 24 ways
• Multiple row DB’s available up to 6 rows (16 and 24 modules)
• Floor or wall-mounted with surface and flush-mounting options
• Panels in compliance with latest international standards and local regulation
MCC Panels
The MCC panels comply with international standards and are available with multiple power stabs that help in supporting high capacity industrial motors as per the client specifications.
• Fully type-tested panels including internal arc fault test
• Form 2, 3 and 4 types of segregations
• Busbar rating up to 7000 A
• Available in fixed and draw out type of design
• Provision of forced ventilation when required
• IP ratings up to IP65
• Front or rear access with pre-fabricated bolts on base for protective devices
• Fault withstand of up to 50KA for 3 Seconds
• Panels in compliance with all international standards
Multi Core and Heat Resistance Cables
Application: Used in locations where high resistance to heat, oil and fire (HOFR) are required. Commonly used in lifts, cranes, pumps and other heavy duty equipment.
Types and Sizes: Single & multi core from 0.5 sq.mm to 630 sq. mm
Conductor: Flexible Tinned Copper Conductor
Insulation: EPR, CSP, PCP, Silicone Rubber
Inner Sheath: EPR, CSP, PCP, Silicon Rubber
Armour: Copper Wire / Stainless Steel Braiding
Outer Sheath: EPR, CSP, PCP, Silicone Rubbe
High Mast
Our High Masts, ranging from 18m-60m in height, offer ease of maintenance with a simple and effective winching system which allows the lighting ring to be lowered to ground level for lantern maintenance. We can also offer a full high mast lighting design package to suit our clients’ requirements, whether the application is for Highways, Sports, Airport or Port Authority.
Earth Chamber
Precast Earth Pit inspection Chamber are load rated to Residantal ,Industrial, Commercial suitable for most types of earthing and lightning protection installations.
Lids are available in 2 types, one with a central lifting eye for industrial applications. The other with a unique plain lid Non trip surface, ideal for public and pedestrian areas, shopping arcades, supermarket forecourts and cinemas where trip hazards are a potential problem.
The base is designed to accept a diagonal earth bar with 5 or 7 terminations.
If an alternative high load inspection pit is required the Heavy Duty Inspection Pit is recommended. Ideal for areas where high loads or small wheel vehicles.
Reviews
There are no reviews yet.