Click to enlarge
Prev
Crepine Type
Go to Shop
Next
Y Type

Basket Type

Basket Type Strainers are installed to protect system appliances, such as: pumps, flowmeters, control valves or regulating devices.
The main function is to remove foreign matter like leaves, sticks or stones from the pipelines. Foreign particles that can harm crucial appliances in the system are stuck in the filter of the strainer, and the user can check the blockage of the filter by using monometer connections.
In case of a situation where the differential pressure reading is high, the blow-off port is used to remove entrapped debris at the bottom of the body.
Due to its design, Basket Type Strainers feature much bigger trap capacity compared to other types of strainers. Furthermore, service from the top cover enable a more shallow Valve Chamber, thereby decreasing the overall cost of the installation.
Categories: ,
Description

Description

Nominal Size
DN100-DN1600
Nominal Pressure
PN10-40
Face to face
–
Body Material Options
Ductile Iron
Carbon Steel
Stainless Steel
Nickel Aluminum Bronze
Accessories
Davit Arm
Manometer Connections
Different Mesh
Flange Standards
EN 1092/2
BS 4504
BS10E
ANSI
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Basket Type”

Your email address will not be published. Required fields are marked *

Related Products
    Read more

    Underground Type
    Underground Air Valves that can be buried under soil are designed to perform three functions:
    1. Venting of large volumes of air on the start-up of the system, while pipelines are filled.
    2. Intake of large volumes of air on shut-off of the system, which pipelines are being drained.
    3. Discharge of pressurized air pockets during the operation.
    Due to its Stainless Steel Sleeve, the valve can be buried under soil. As a result, no need for an expensive valve chamber is needed.
    Moreover, it does not require any external isolation valve, due to its integral automatic closing mechanism. The valve can be serviced from a Surface Box and taken out for cleaning or maintenance.
    Read more
    Read more

    B Type
    B Type Irrigation Hydrants have a special closing mechanism enabling gradual flow increase/decrease when the handwheel is turned, preventing slam closure.
    Hydrants are available with an optional anti-frost sleeve for deep water networks, and an automatic drainage valve to bleed the body when the hydrant is closed, to prevent frost damages.
    Nozzles that are used in hydrant connection have integral pressure regulator and flow limiter in order to provide constant pressure and flow rate to the farmer. Number of nozzles on the body can be increased up to 2 outlets, enabling supply to more than one farmer from a single hydrant.
    Read more
    Read more

    Quick Relief

    Quick Pressure Relief Valves protect pumps and water distribution systems from extreme situations by relieving the excessive pressure immediately. 

    It opens fully in case of a sudden pressure peak and closes drip tight when the pressure level does not exceed the pre-set pressure level.

    Read more
    Read more

    Ultrasonic
    Ultrasonic Watermeters read water flow by the help of two ultrasonic probes positioned in the same axis.
    In case of a velocity change, variance in ultrasonic waves is detected by the probe and by the help of the processor; these variances are converted into flow rate data.
    Flowrate and Consumption Values can be read from the IP68 protected LED Screen.
    Furthermore, it provides an alarm in low battery conditions. Internal Lithium Battery can provide power up to 10 years autonomously.
    As for communications, the meter has an M-Bus and Optic interface as standard and Pulse or RF interface can be provided optionally.
    Read more
    Read more

    C Type
    C Type Irrigation Hydrants have a special closing mechanism enabling gradual flow increase/decrease when the handwheel is turned, preventing slam closure.
    Hydrants are available with an optional anti-frost sleeve for deep water networks, and an automatic drainage valve to bleed the body when the hydrant is closed, to prevent frost damages.
    Nozzles that are used in hydrant connection have integral pressure regulator and flow limiter in order to provide constant pressure and flow rate to the farmer. Number of nozzles on the body can be increased up to 4 outlets, enabling supply to more than one farmer from a single hydrant.
    Read more
    Read more

    Repair Couplings

    Main focus is in 316L body units which are normally on 2 weeks manufacturing lead. Due to prompt delivery these find major acceptance on site repair works / marine / shut-down works etc.

    Axi-Flex /Stepped Couplings will connect similar or dissimilar pipes, same of differing OD and the wrap-a-round Repair Couplings find favour with end-user like DEWA, ADWEA, EMICOOL, EMPOWER etc. in situation where they experience pipeline cracks and associated leakages.

    Sizes from DN50 to DN4000 but as the size goes up the pressure capability decreases.

    Read more