- +971 4 578 7532
- +971 50 803 1253
- sales@deltapower.ae
Swing Type
Swing Type Check Valves are designed to have drip tight sealing in case of back flow.
The disc is opened in normal flow direction, providing laminar flow.
When there is a pressure change in the system and flow is coming back, the disc acts and closes the valve.
Accessories that enable slow or fast closing of the disc are available upon request.
Termination Kit
Heat Shrinkable Cable Termination Kits are extensively tested and used worldwide for reliable cable junctions in the voltage range from 7.2kv to 42kV.
• The kits are designed for either indoor or outdoor applications for cables with polymeric (XLPE or EPR) insulation
• Can be used with both compression or mechanical type lugs (which can be supplied in the kit if specified).
• The termination kits combine the anti-tracking external tubing for excellent weathering and electrical properties
Triple Function Sewage
Air Release & Vacuum Valves for Sewage are designed to perform three functions in a single body for use in wastewater/ sewage systems:
1. Venting of large volumes of air on the start-up of the system, while pipelines are filled.
2. Intake of large volumes of air on shut-off of the system, while pipelines are being drained.
3. Discharge of pressurized air pockets during the operation.
Due to its special sealing mechanism, the air valve does not get plugged and can operate in liquids with particles.
Type TR
Centering clamps for medium and medium pipes
large diameter. They are also designed to be
used for long load-bearing pipes, where it is very
important to reduce friction when
the introduction of a new pipe in
new or old ducts/ducts; Casters help
The new hose to move more easily during
installation. Assembling unit assemblies
spacing is facilitated by a snap-in system,
Ultrasonic
Ultrasonic Watermeters read water flow by the help of two ultrasonic probes positioned in the same axis.
In case of a velocity change, variance in ultrasonic waves is detected by the probe and by the help of the processor; these variances are converted into flow rate data.
Flowrate and Consumption Values can be read from the IP68 protected LED Screen.
Furthermore, it provides an alarm in low battery conditions. Internal Lithium Battery can provide power up to 10 years autonomously.
As for communications, the meter has an M-Bus and Optic interface as standard and Pulse or RF interface can be provided optionally.
Underground Type
Underground Fire Hydrants are made of ductile iron body, valve mechanism, and a spindle that controls the sealing.
When head of the hydrant is turned counter clockwise, the spindle moves down, sealing the valve at the flow direction. In the reverse action, fire hydrant shuts-off drip tight.
Underground Fire Hydrants are used with Surface Box and are buried in soil. As a result, hydrants are protected from accidents.
Underground Type
Underground Air Valves that can be buried under soil are designed to perform three functions:
1. Venting of large volumes of air on the start-up of the system, while pipelines are filled.
2. Intake of large volumes of air on shut-off of the system, which pipelines are being drained.
3. Discharge of pressurized air pockets during the operation.
Due to its Stainless Steel Sleeve, the valve can be buried under soil. As a result, no need for an expensive valve chamber is needed.
Moreover, it does not require any external isolation valve, due to its integral automatic closing mechanism. The valve can be serviced from a Surface Box and taken out for cleaning or maintenance.