- +971 4 578 7532
- +971 50 803 1253
- sales@deltapower.ae
Warning Tapes
We supply printed warning tapes for magnetic and non magnetic detection and identification of underground utility service lines. The width of tape used is determined by the size and depth of the underground utility line.
• Rolls available in different width, thickness, color and text, as per customers specifications
• Excellent tensile strength and elongation
• Excellent impact strength
• High stress cracking resistance for longer shelf and service life.
The warning tapes are used for following services-
• Water pipe lines
• Sewage
• Drainage pipes
• Electrical cables
• Fiber optics
• Safety nets
• Gas pipelines
Related Products
Plastic Cell Soak away System
Local rainwater infiltration is often required by law. As more and more ground is sealed with buildings, car parks and roads, the sewer system is having to work harder and the risk of flooding increases. Our infiltration systems are here to help. They make sense both ecologically and economically because they take the strain off the sewer network and save surface water drainage charges.
Plastic storage systems have become a popular solution for rainwater infiltration and retention. Infiltration ditch bodies require very small amounts of space compared with gravel ditches or drainage pipes. They offer a large infiltration volume for a low weight. Other benefits of infiltration modules include their high load capacity and durability.
Flap Valves
Flap valves: Flap valve especially designed to prevent backflow into sewers and protect properties against flooding.The flap valve is recommended for properties located close to waterways and bodies of water (streams, rivers, embankments, ponds …) where the surface water is directly discharged through an outfall into the watercourse.
It prevents the water from rising up through the sewer (heavy rain, storms or floods) and causing flooding.
· Made from glass fibre reinforced isophtal acid polyester and coated in an isophtal acid Gel-Coat, the new MULTI N flap valve design from offers superior resistance, all while further reducing its weight.
· The screws and bolts as well as the valve’s axle are made from grade 1.4401 (316) stainless steel and the seal is made out of EPDM.
· The MULTI N valve can withstand pressures of up to 1 bar and is highly resistant to corrosion, ultraviolet light, thermal shocks and mechanical stress.
· Flap valves can be equipped, if necessary, with a lifting ring nut for quick and easy handling from a distance.
· Flap valve can also deliver you purpose-built solutions for your specific applications
Flow Meters
We provide complete portfolio for process instrumentation
· Flow, level, temperature, pressure, process analytics
· Meters, sensors, systems and accessories
· Wide range of measurement technologies
Insulted Skid Spacers
For improved performance, reliability and productivity, then our casing spacers may be just what you are looking for. Here are a few of the advantages of casing spacers versus banded wood skids.
– Casing Spacers will save you time and labor – quickly installed by a single worker.
– Casing Spacers’ performance and reliability are far superior. Casing spacers provide electrical insulation, will not rot or settle, support carrier pipe weight uniformly, protect against long term corrosion, require no casing filler and slide into place easily.
Please have the following information ready when placing your order:
– Casing Spacer Material: Carbon Steel, Stainless Steel, or Polyethylene
– Configuration: Standard (Clear Bell Only), Centered, Centered Restrained, Clustered
– Type of Carrier Pipe
– Diameter of Carrier Pipe
– Inside Diameter of Casing Pipe (or Casing wall thickness)
– Outside Diameter OD of Bell (if applicable)
– Width of Spacer, Model Number etc..
– Additional information (for multi-pipe, cluster design)
– Model & Quantity of End Seals
Surge Protection System Pressure vessels
We provide surge analysis and pressure vessels in the piping system to avoid water hammer which can result in the following:
Definition of Water Hammer
The phenomenon of Water Hammer takes place without any advance notice just as blackout, and it causes drastic increase or decrease (negative pressure) of pressure. Thus, it is vital to install equipment to relieve the impact of Water Hammer to secure safe operation of a piping system. The pressure within a piping should be controlled in a certain range during the operation even under an unexpected situation.
Why do a surge(water hammer)analysis necessary?
– Pressure extremes usually occur during a period of transient flow
– Pressures may exceed design limits
– Undesirable conditions occur (low pressures, cavitation, large pressure spikes, etc.)
– High pressure transients break pipes
– Low pressure transients destroy seals
– Low pressure transients may cause health risk
– Evaluate surge protection schemes
Damage of Water Hammer
-Raised pressure in the pipeline causes break of facilities such as pumps, valves, pipes, and supporting structures.
-Vapor cavities causes collapse or heavy shock wave generated in the course of column separation and subsequent return causes break of the pipeline.
– Low pressure in water supply pipeline causes health risk by letting in pollutants from outside.
– Water hammer may cause vibration and noise or make automatic control hard due to abnormal pressure wave.
Based on the surge analysis we provide surge vessel fully tested and certified.
Nut Bolts and Washer
Fasteners: We supply variety of standard and special-grade fasteners a broad range of extremely reliable, precise and accurate Stud Bolts, Anchor Bolts, U Bolts, Threaded Bars in Steel and Steel Alloys of different sizes from high-quality grade raw material. At the same time we can facilitate customers by our ready stock, for hex nuts, heavy hex nuts, jam nuts and washers in black, electro galv., hot dip galv., stainless steel finish.
Reviews
There are no reviews yet.