- +971 4 578 7532
- +971 50 803 1253
- sales@deltapower.ae
Type TR
Centering clamps for medium and medium pipes
large diameter. They are also designed to be
used for long load-bearing pipes, where it is very
important to reduce friction when
the introduction of a new pipe in
new or old ducts/ducts; Casters help
The new hose to move more easily during
installation. Assembling unit assemblies
spacing is facilitated by a snap-in system,
Related Products
Surge Anticipating
Abrupt pump stopping is followed by a pressure drop as the water column continues traveling along the line.
The returning column hits the closed pump check valve, creating a high pressure surge wave, which travels at up to 4 Mach.
Eliminating such surge requires anticipation and pre-action.
Surge Anticipating Valves react to the pressure drop, accepting the returning column while already open, thus eliminating the surge.
Crepine Type
Crepine Type Strainers are installed in the entrance of pump suction pipes or in a transition from open channel to closed piping.
The main function is to protect the system from foreign matter like leaves, sticks or stones from the pipelines.
Foreign particles that can harm crucial appliances in the system are stuck in the filter of the strainer, thereby preventing entry to the pipeline.
Ultrasonic
Ultrasonic Watermeters read water flow by the help of two ultrasonic probes positioned in the same axis.
In case of a velocity change, variance in ultrasonic waves is detected by the probe and by the help of the processor; these variances are converted into flow rate data.
Flowrate and Consumption Values can be read from the IP68 protected LED Screen.
Furthermore, it provides an alarm in low battery conditions. Internal Lithium Battery can provide power up to 10 years autonomously.
As for communications, the meter has an M-Bus and Optic interface as standard and Pulse or RF interface can be provided optionally.
Y Type
Y Type Strainers are installed to protect system appliances, such as: pumps, flowmeters, control valves or regulating devices.
The main function is to remove foreign matter like leaves, sticks or stones from the pipelines. Foreign particles that can harm crucial appliances in the system are stuck in the filter of the strainer, and the user can check the blockage of the filter by using monometer connections.
In case of a situation where the differential pressure reading is high, the blow-off port is used to remove entrapped debris at the bottom of the body.
Y Type Strainers feature large trap capacity, low head loss and ease of both cleaning and handling..
Balancing Valves
Balancing Valves are used in HVAC applications for flow regulation.
Cartridge type Dynamic Balancing Valves provide constant flow rate at a predefined pressure range, thereby providing equal heating or cooling opportunity for various users.
Underground Type
Underground Air Valves that can be buried under soil are designed to perform three functions:
1. Venting of large volumes of air on the start-up of the system, while pipelines are filled.
2. Intake of large volumes of air on shut-off of the system, which pipelines are being drained.
3. Discharge of pressurized air pockets during the operation.
Due to its Stainless Steel Sleeve, the valve can be buried under soil. As a result, no need for an expensive valve chamber is needed.
Moreover, it does not require any external isolation valve, due to its integral automatic closing mechanism. The valve can be serviced from a Surface Box and taken out for cleaning or maintenance.
Reviews
There are no reviews yet.