- +9714 421 8369
- +971 50 379 6862
- sales@deltapower.ae
Street Light Column Poles
Our tubular / octagonal steel parallel sided stepped lighting columns are available from 3m-18 m and in a wide range of sizes and strengths.
Our standard columns are designed to BS EN 40 to take a variety of lanterns and brackets and special columns can be designed to your individual requirements.
Related Products
Distribution Transformers
Our Oil Type Distribution Transformers offer a cost-effective solution for your network. Whether it is for managing a rural network, or for simply improving your energy efficiency, we have the perfect solution for any distribution transformer application. Ground mounted, pole mounted or high-efficiency oil type transformers all form part of our extensive range.
Control Cables
Application: Suitable for connections for Control Circuits, Communication Systems, Electrical Panels, Machine Tools, etc. Also used for lighting at lower loads.
Types and Sizes: Upto 61 cores from 1.0 sq. mm to 2.5 sq. mm.
Conductor: Copper – Solid, Stranded (Circular) or Flexible – Bare or Tinned
Insulation: PVC – Type A, Type C, Polyetheylene, XLPE
Inner Sheath: PVC – ST1, HR, FR, FRLS, LSZH
Armour: Galvanized Steel Wire / Strip / Tape
Outer Sheath: PVC – ST1, HR, FR, FRLS, LSZH
CABLE GLANDS AND LUGS
ELECTRICAL AND PANEL BOARD COMPONENTS
• Cable Gland and Accessories
• Tinned Copper Lugs & Ferrules
• Flexible Conduit & Accessories
• Brass neutral link
Distribution Switchboards
A final distribution board (FDB) is an assembly of protective devices, including two or more fuses or circuit breakers, arranged for the distribution of electrical energy to the final circuits.
• Form 2 segregation as standard
• Sheet steel enclosures ranging from 1.2 mm thickness (standard) up to 1.5 mm (special project requirements)
• Available in row type and pan assembly type
• IP ratings up to IP42
• Single phase and three phase boards available up to 24 ways
• Multiple row DB’s available up to 6 rows (16 and 24 modules)
• Floor or wall-mounted with surface and flush-mounting options
• Panels in compliance with latest international standards and local regulation
Earthing Rods & Accessories
Copper earth rods offer the contractor the best and most economical earth rods for structural earthing and lightning protection – earth rods are designed for use where extremely high corrosion resistance and long service life are required.
Earth rods and their fittings are used to provide the interface to ground in all soil conditions in order to achieve satisfactory earthing systems in overhead and underground electricity distribution and transmission networks – providing high fault current capacity on low, medium and high voltage substations, towers and power distribution applications.
Copper earth rods are produced from solid copper bar and are internally threaded for jointing – when deep driving a solid copper earth rod the usual practice is to insert the rod into a bore hole and backfill with either low resistance earthing compound or Bentonite.
Copper earth rods provide effective earthing for all site conditions and are manufactured from 99.9% copper with excellent corrosion resistance and very high tensile strength.
Earth rods take advantage of lower resistivity soils at greater depths than normal excavation will allow – used in conjunction with copper earth plates they are used to attain an effective earth in shallow soils or in locations with large amounts of buried services eg high voltage switching positions.
Other type of earthing rods are-
• Solid Copper
• Copperbond
• Galvanised Steel
• Stainless Steel
Reviews
There are no reviews yet.