- +971 4 578 7532
- +971 50 803 1253
- sales@deltapower.ae
Pipe Repair Clamp
A clamp for quick repair of pit holes, punctures or splits in steel pipe. Repairs leaks on water, gas, oil and pressure steam lines up to normal working pressure 10 Kgf/cm². Suitable for repairs of steel, cast iron, brass, asbestos cementos and plastic pipes.
Related Products
Warning Tapes
We supply printed warning tapes for magnetic and non magnetic detection and identification of underground utility service lines. The width of tape used is determined by the size and depth of the underground utility line.
• Rolls available in different width, thickness, color and text, as per customers specifications
• Excellent tensile strength and elongation
• Excellent impact strength
• High stress cracking resistance for longer shelf and service life.
The warning tapes are used for following services-
• Water pipe lines
• Sewage
• Drainage pipes
• Electrical cables
• Fiber optics
• Safety nets
• Gas pipelines
Flow Meters
We provide complete portfolio for process instrumentation
· Flow, level, temperature, pressure, process analytics
· Meters, sensors, systems and accessories
· Wide range of measurement technologies
Insulted Skid Spacers
For improved performance, reliability and productivity, then our casing spacers may be just what you are looking for. Here are a few of the advantages of casing spacers versus banded wood skids.
– Casing Spacers will save you time and labor – quickly installed by a single worker.
– Casing Spacers’ performance and reliability are far superior. Casing spacers provide electrical insulation, will not rot or settle, support carrier pipe weight uniformly, protect against long term corrosion, require no casing filler and slide into place easily.
Please have the following information ready when placing your order:
– Casing Spacer Material: Carbon Steel, Stainless Steel, or Polyethylene
– Configuration: Standard (Clear Bell Only), Centered, Centered Restrained, Clustered
– Type of Carrier Pipe
– Diameter of Carrier Pipe
– Inside Diameter of Casing Pipe (or Casing wall thickness)
– Outside Diameter OD of Bell (if applicable)
– Width of Spacer, Model Number etc..
– Additional information (for multi-pipe, cluster design)
– Model & Quantity of End Seals
Polythene Sheets
Polythene sheets are used during building construction to prevent structural damping that occurs when warm, moist air penetrates inside a concrete slab, wall, roof or floor structure reaches the dew point, and then condenses into liquid water.The warm, damp air may penetrate a wall from the inside of a heated building in a cold climate or from the exterior of an air-conditioned building in a warm climate..
This condensation may allow mold growth, rotting of timber, corrosion of metal components and reduction in the thermal insulation’s effectiveness.
The resulting structural damage may occur without visible indications until significant damage has occurred.
The most effective method of controlling damping is using an impervious vapor-barrier on the warm side of the structure.
It has an extremely low water permeability rating of typically 1.7SI Perms.
It can be used in between the insulation material and structure surface to act as a damp-proof membrane.
On site concrete slabs employ a 1000 guage (250 microns) polythene sheet laid underneath the concrete to prevent the moisture from being absorbed.
Filters and Membranes
GE Osmonics Desal Membranes
GE Osmonics membrane elements are applied for placing reverse osmosis and nanofiltration membranes in RO systems for water treatment.
Membrane of all 4 inch and 8 inch GE Osmosics membranes suitable for different pressure ratings depending on the to be treated salinity of the water. Also the end-caps and membrane module connectors are indicated with their model type numbers for spare parts & components ordering and material selection.
GE Osmonics Desal membrane elements are divided in the following catagories:
AD – Sea water membranes
AD membrane elements are characterized by a very good sodium chloride rejection. AD Seawater Elements feature high-pressure construction.
AE – High Rejection High Flow Seawater RO Elements
AE – High Rejection Low Energy Seawater RO Elements
AG – Brackish water membranes
AG Standard Brackish Water Elements are selected when high rejection and operating pressures as low as 200 psi are desired. These elements allow moderate energy savings, and are considered a standard in the industry.
Reviews
There are no reviews yet.