- +971 4 578 7532
- +971 50 803 1253
- sales@deltapower.ae
Earthing Rods & Accessories
Copper earth rods offer the contractor the best and most economical earth rods for structural earthing and lightning protection – earth rods are designed for use where extremely high corrosion resistance and long service life are required.
Earth rods and their fittings are used to provide the interface to ground in all soil conditions in order to achieve satisfactory earthing systems in overhead and underground electricity distribution and transmission networks – providing high fault current capacity on low, medium and high voltage substations, towers and power distribution applications.
Copper earth rods are produced from solid copper bar and are internally threaded for jointing – when deep driving a solid copper earth rod the usual practice is to insert the rod into a bore hole and backfill with either low resistance earthing compound or Bentonite.
Copper earth rods provide effective earthing for all site conditions and are manufactured from 99.9% copper with excellent corrosion resistance and very high tensile strength.
Earth rods take advantage of lower resistivity soils at greater depths than normal excavation will allow – used in conjunction with copper earth plates they are used to attain an effective earth in shallow soils or in locations with large amounts of buried services eg high voltage switching positions.
Other type of earthing rods are-
• Solid Copper
• Copperbond
• Galvanised Steel
• Stainless Steel
Related Products
High Mast
Our High Masts, ranging from 18m-60m in height, offer ease of maintenance with a simple and effective winching system which allows the lighting ring to be lowered to ground level for lantern maintenance. We can also offer a full high mast lighting design package to suit our clients’ requirements, whether the application is for Highways, Sports, Airport or Port Authority.
Multi Core and Heat Resistance Cables
Application: Used in locations where high resistance to heat, oil and fire (HOFR) are required. Commonly used in lifts, cranes, pumps and other heavy duty equipment.
Types and Sizes: Single & multi core from 0.5 sq.mm to 630 sq. mm
Conductor: Flexible Tinned Copper Conductor
Insulation: EPR, CSP, PCP, Silicone Rubber
Inner Sheath: EPR, CSP, PCP, Silicon Rubber
Armour: Copper Wire / Stainless Steel Braiding
Outer Sheath: EPR, CSP, PCP, Silicone Rubbe
Cable Ladders
Cable ladders made from a variety of materials, with a wide choice of cabling depths and load capabilities. They provide a cable management solution for heavy commercial, industrial, mining, LNG or other applications.
They are supplied in straight lengths, but use fittings to make directional or level changes with bends, tees, crosses or risers, or to change cabling widths with reducers.
Low Voltage Switchgear
Our MDB’s are dimensionally accurate and offer hassle-free performance and are well known for their superior quality, durability, high mechanical strength and perfect finishing.
• Design verified power switchgear and control gear assembly as per IEC 61439-2 and type tested for internal errors (arc faults) as per IEC 61641
• Modular sheet steel assembly system with 2 mm thickness and Internal segregation from form 1 to form 4 as per IEC 61439-2 with high level of corrosion resistance
• Epoxy powder coated to RAL 7032/ RAL 7035 and folded construction for high rigidity
• Fully type-tested panels up to 7000A (ASTA Certified) in compliance with all major regulations including DEWA,
Control Cables
Application: Suitable for connections for Control Circuits, Communication Systems, Electrical Panels, Machine Tools, etc. Also used for lighting at lower loads.
Types and Sizes: Upto 61 cores from 1.0 sq. mm to 2.5 sq. mm.
Conductor: Copper – Solid, Stranded (Circular) or Flexible – Bare or Tinned
Insulation: PVC – Type A, Type C, Polyetheylene, XLPE
Inner Sheath: PVC – ST1, HR, FR, FRLS, LSZH
Armour: Galvanized Steel Wire / Strip / Tape
Outer Sheath: PVC – ST1, HR, FR, FRLS, LSZH
Street Light Column Poles
Our tubular / octagonal steel parallel sided stepped lighting columns are available from 3m-18 m and in a wide range of sizes and strengths.
Our standard columns are designed to BS EN 40 to take a variety of lanterns and brackets and special columns can be designed to your individual requirements.
Reviews
There are no reviews yet.