1 Single Chamber & Single Function

Related Products

Read more
A Type
A Type Irrigation Hydrants have a special closing mechanism enabling gradual flow increase/decrease when the handwheel is turned, preventing slam closure.
Hydrants are available with an optional anti-frost sleeve for deep water networks, and an automatic drainage valve to bleed the body when the hydrant is closed, to prevent frost damages.
Nozzles that are used in hydrant connection have integral pressure regulator and flow limiter in order to provide constant pressure and flow rate to the farmer. Number of nozzles on the body can be increased up to 4 outlets, enabling supply to more than one farmer from a single hydrant.
Read more

Read more
Quick Relief
Quick Pressure Relief Valves protect pumps and water distribution systems from extreme situations by relieving the excessive pressure immediately. 
It opens fully in case of a sudden pressure peak and closes drip tight when the pressure level does not exceed the pre-set pressure level.
Read more

Read more
Underground Type
Underground Air Valves that can be buried under soil are designed to perform three functions:
1. Venting of large volumes of air on the start-up of the system, while pipelines are filled.
2. Intake of large volumes of air on shut-off of the system, which pipelines are being drained.
3. Discharge of pressurized air pockets during the operation.
Due to its Stainless Steel Sleeve, the valve can be buried under soil. As a result, no need for an expensive valve chamber is needed.
Moreover, it does not require any external isolation valve, due to its integral automatic closing mechanism. The valve can be serviced from a Surface Box and taken out for cleaning or maintenance.
Read more

Read more
Basket Type
Basket Type Strainers are installed to protect system appliances, such as: pumps, flowmeters, control valves or regulating devices.
The main function is to remove foreign matter like leaves, sticks or stones from the pipelines. Foreign particles that can harm crucial appliances in the system are stuck in the filter of the strainer, and the user can check the blockage of the filter by using monometer connections.
In case of a situation where the differential pressure reading is high, the blow-off port is used to remove entrapped debris at the bottom of the body.
Due to its design, Basket Type Strainers feature much bigger trap capacity compared to other types of strainers. Furthermore, service from the top cover enable a more shallow Valve Chamber, thereby decreasing the overall cost of the installation.
Read more

Read more
Needle Plunger Valve
Needle Valves open and close by the axial movement of the disc that is connected to a crank and shaft mechanism which the gearbox commands. 
When the valve is in fully open position, due to its aerodynamic design, it causes very low head loss and maximum flow capacity.
The disc is guided by circular disc guides deposit welded to the main body, which causes minimum friction loss and stable movement.
Stem, rotated by the gearbox, commands the crank mechanism which moves the disc axially to change the opening area of the valve.
When the valve is in fully closed position, due to special sealing mechanism, drip tight sealing is achieved.
Due to pressure-independent disc operation and special gearbox, torque values needed even in large sizes are minimum.
Read more

Read more
D Type
D Type Irrigation Hydrants have a special closing mechanism enabling gradual flow increase/decrease when the handwheel is turned, preventing slam closure.
Hydrants are available with an optional anti-frost sleeve for deep water networks, and an automatic drainage valve to bleed the body when the hydrant is closed, to prevent frost damages.
D Type Hydrants are used in low pressure applications where the outlets have a flow limiter in order to provide constant flow rate to the farmer. Number of outlets on the body can be increased up to 2 outlets, enabling supply to more than one farmer from a single hydrant.
Read more