- +9714 421 8369
- +971 50 379 6862
- sales@deltapower.ae
Related Products
HDPE Spacers
For road-crossing where the fluid carrying pipe cannot be buried directly. The movement of heavy vehicles will transfer impact loads and can damage pipeline with leaking water or gas etc. In all such cases, the carrier pipe is inserted into a sleeve pipe. Spacers allow the carrier pipe to be easily pulled into the existing sleeve pipe and the traffic loads do not reach the main service pipelines. Small size carrier pipes DN50 to very large DN3000
Repair Couplings
Main focus is in 316L body units which are normally on 2 weeks manufacturing lead. Due to prompt delivery these find major acceptance on site repair works / marine / shut-down works etc.
Axi-Flex /Stepped Couplings will connect similar or dissimilar pipes, same of differing OD and the wrap-a-round Repair Couplings find favour with end-user like DEWA, ADWEA, EMICOOL, EMPOWER etc. in situation where they experience pipeline cracks and associated leakages.
Sizes from DN50 to DN4000 but as the size goes up the pressure capability decreases.
DI pipes & Fittings
A full range of ductile iron pipe fittings, flanged, socket and spigot ended. Protection by fusion bonded epoxy coating, blue, 300µm.
Good quality, lost foam foundry and at competitive prices. Possible to ship quickly and with 3rd party inspected documentation.
Range of our sizes starts from DN80mm to DN1200mm.
Level Control
Float controlled valves combine the advantages of excellent hydraulic control valves with the simplicity of mechanical floats.
The ability to separate the main valve from the float enables eliminating most of the installation and maintenance problems associated with mechanical float valves.
Level Control Valve with Modulating Horizontal Float is used to control reservoir filling to maintain constant water level regardless of fluctuating demand.
C Type
C Type Irrigation Hydrants have a special closing mechanism enabling gradual flow increase/decrease when the handwheel is turned, preventing slam closure.
Hydrants are available with an optional anti-frost sleeve for deep water networks, and an automatic drainage valve to bleed the body when the hydrant is closed, to prevent frost damages.
Nozzles that are used in hydrant connection have integral pressure regulator and flow limiter in order to provide constant pressure and flow rate to the farmer. Number of nozzles on the body can be increased up to 4 outlets, enabling supply to more than one farmer from a single hydrant.
Solenoid Control
Solenoid Control Valves are simple electrically activated on/off valves that can be of critical importance in controlling flow in every water system.
The electrical signal used to activate the solenoid can be sent from timers, relays, clocks, pressure, level or flow transmitters, etc.
Reviews
There are no reviews yet.