- +971 4 578 7532
- +971 50 803 1253
- sales@deltapower.ae
Type SM DUO 2
Related Products
Underground Type
Underground Fire Hydrants are made of ductile iron body, valve mechanism, and a spindle that controls the sealing.
When head of the hydrant is turned counter clockwise, the spindle moves down, sealing the valve at the flow direction. In the reverse action, fire hydrant shuts-off drip tight.
Underground Fire Hydrants are used with Surface Box and are buried in soil. As a result, hydrants are protected from accidents.
Dismantling pieces
Dismantling Joints allow easy installation and removal of valves from the system during maintenance.
By using the bolts on the product, the user can create a work space in the longitudinal direction and can work easily on the valve that is connected after the dismantling joint.
Surge Anticipating
Abrupt pump stopping is followed by a pressure drop as the water column continues traveling along the line.
The returning column hits the closed pump check valve, creating a high pressure surge wave, which travels at up to 4 Mach.
Eliminating such surge requires anticipation and pre-action.
Surge Anticipating Valves react to the pressure drop, accepting the returning column while already open, thus eliminating the surge.
Expansion Joints
For water, waste water, chilled water & many other services, to permit pipelines “flex” a bit. Metallic pipes expand and contract when the ambient (or service) temperatures vary and non-metallic pipes (which may be buried) will move with ground settlement etc. Where probable movement can be envisaged the values are designed by a compensator which can flex, thus avoiding undue pipeline damage. Interesting applications are reservoir inlet/outlet connections, pump connections, differing flange standards either end, axial or angular offset of new to old pipelines. Sizes from DN50 to DN5000 and pressures of PN6 to PN25 on rubber, but the larger sizes would be lower pressure capability.. Higher pressures and temperatures in 316SS.
Plug Valve
Critically acclaimed for raw sewage lines, for shut off service. Eccentricity of the plug (and its turning away from the flow path) is a great feature in allowing (sewerage) solids to pass freely. Sizes and Pressures. Sizes 3” (DN80) to 48” (DN1200) and Pressures of PN10, PN16. Smaller sizes up to DN300 can also be rated PN25
A Type
A Type Irrigation Hydrants have a special closing mechanism enabling gradual flow increase/decrease when the handwheel is turned, preventing slam closure.
Hydrants are available with an optional anti-frost sleeve for deep water networks, and an automatic drainage valve to bleed the body when the hydrant is closed, to prevent frost damages.
Nozzles that are used in hydrant connection have integral pressure regulator and flow limiter in order to provide constant pressure and flow rate to the farmer. Number of nozzles on the body can be increased up to 4 outlets, enabling supply to more than one farmer from a single hydrant.
Reviews
There are no reviews yet.