Click to enlarge
Prev
Crepine Type
Crepine Type
Go to Shop
Next
Y Type
Y Type

Basket Type

Basket Type Strainers are installed to protect system appliances, such as: pumps, flowmeters, control valves or regulating devices.
The main function is to remove foreign matter like leaves, sticks or stones from the pipelines. Foreign particles that can harm crucial appliances in the system are stuck in the filter of the strainer, and the user can check the blockage of the filter by using monometer connections.
In case of a situation where the differential pressure reading is high, the blow-off port is used to remove entrapped debris at the bottom of the body.
Due to its design, Basket Type Strainers feature much bigger trap capacity compared to other types of strainers. Furthermore, service from the top cover enable a more shallow Valve Chamber, thereby decreasing the overall cost of the installation.
Compare
Categories: ,
Description

Description

Nominal Size
DN100-DN1600
Nominal Pressure
PN10-40
Face to face
–
Body Material Options
Ductile Iron
Carbon Steel
Stainless Steel
Nickel Aluminum Bronze
Accessories
Davit Arm
Manometer Connections
Different Mesh
Flange Standards
EN 1092/2
BS 4504
BS10E
ANSI
Reviews (0)

Reviews

There are no reviews yet.

Be the first to review “Basket Type”

Your email address will not be published. Required fields are marked *

Related Products

    Pre-Paid
    Read more

    Pre-Paid
    Ultrasonic Watermeters read water flow by the help of two ultrasonic probes positioned in the same axis.
    In case of a velocity change, variance in ultrasonic waves is detected by the probe and by the help of the processor; these variances are converted into flow rate data.
    Flowrate and Consumption Values can be read from the IP68 protected LED Screen.
    Furthermore, it provides an alarm in low battery conditions. Internal Lithium Battery can provide power up to 10 years autonomously.
    Shutoff Valve works with hydraulic principles and is controlled by the Prepaid Controller. When open, the valve provides minimum headloss and it provides drip tight sealing in shutoff.
    Read more
    Solenoid Control
    Read more

    Solenoid Control

    Solenoid Control Valves are simple electrically activated on/off valves that can be of critical importance in controlling flow in every water system. 

    The electrical signal used to activate the solenoid can be sent from timers, relays, clocks, pressure, level or flow transmitters, etc.

    Read more
    Triple Function Sewage
    Read more

    Triple Function Sewage
    Air Release & Vacuum Valves for Sewage are designed to perform three functions in a single body for use in wastewater/ sewage systems:
    1. Venting of large volumes of air on the start-up of the system, while pipelines are filled.
    2. Intake of large volumes of air on shut-off of the system, while pipelines are being drained.
    3.  Discharge of pressurized air pockets during the operation.
    Due to its special sealing mechanism, the air valve does not get plugged and can operate in liquids with particles.
    Read more
    Dismantling pieces
    Read more

    Dismantling pieces
    Dismantling Joints allow easy installation and removal of valves from the system during maintenance.
    By using the bolts on the product, the user can create a work space in the longitudinal direction and can work easily on the valve that is connected after the dismantling joint.
    Read more
    Quick Relief
    Read more

    Quick Relief

    Quick Pressure Relief Valves protect pumps and water distribution systems from extreme situations by relieving the excessive pressure immediately. 

    It opens fully in case of a sudden pressure peak and closes drip tight when the pressure level does not exceed the pre-set pressure level.

    Read more
    Underground Type
    Read more

    Underground Type
    Underground Fire Hydrants are made of ductile iron body, valve mechanism, and a spindle that controls the sealing.
    When head of the hydrant is turned counter clockwise, the spindle moves down, sealing the valve at the flow direction. In the reverse action, fire hydrant shuts-off drip tight.
    Underground Fire Hydrants are used with Surface Box and are buried in soil. As a result, hydrants are protected from accidents.
    Read more